The majority of the owners will be on their car maintenance, change the oil, cleaning oil filter (oil filter).   But many owners opened after a period of time will complain, why your car maintenance time, why the loss of power, fuel consumption will rise?
  
It is the air cleaner car needs cleaning or replacement.   General motorcycle driving for about 2000 kilometers, are required to clean up an air cleaner.   If often run in the dusty road, should also be appropriate to shorten the cleaning period.   The air filter dust blocking, air resistance increases, resulting in the combustible gas mixture thickens, the power output of the engine is decreased, fuel consumption increased, go down for a long time will affect the service life of the engine.   The author make a lesson for you the owner here.   Cross bike air cleaner in the body in the left position, the air filter in the rear wheel scooter near, all need to remove the shield, you will find similar foam materials.

The air filter cartridge is divided into dry and wet filter filter two.

Currently on the market most civilian motorcycles are the use of dry dry filter, filter material for filter paper or non-woven fabric. The cleaning step dry air filter:
1, remove the filter air cleaner, remember when removing filter installation direction.
2, do not wet filter light vibration tapping can also use compressed air blowing from the inside to the outside, the internal dust blowing.
3, with dust brush net external.
4, clean, should inspect whether the damaged filter, if damaged, can use the adhesive to repair, if the filter is severely damaged or can not be cleaned, should be replaced with new parts.   Remember when the filter should be replaced with new serious fouling core in a timely manner, (the market prices generally around 15 yuan).

Manufacture of polyurethane materials using wet filter sponge, cleaning step wet air filter:
1, unscrew the cover of the air cleaner housing screws, remove the cover of the air cleaner housing.
2, loosen the fixed filter hook, remove the filter and the supporting frame, and the separation.
3, gasoline or detergent into the washing basin, will filter immersion cleaning liquid and gently knead wash.
4, with two hands washed too numerous to mention extrusion filter, dirty cleaning liquid entirely out, without hand wringing filter, filter to avoid ground fissure.   When cleaning, should be carefully to see whether the filter broken or cracked, if damage should be replaced with new parts.
5, if the filter element and the supporting frame is fixed together.   It can be in the cleaning solution soak 10-15 minutes, remove the cleaning liquid.
6, clean the lubrication filter surface of a few drops of gasoline engine oil, the oil is slightly wet.
7, with a clean cloth to wipe the outer shell of the air filter, then the filter core is arranged on a support frame, and then remove the reverse order installation.   The correct location of the installation, otherwise the air cleaner will not filter effect.